Lightweight Cement Partition Wall Panel Extrusion Machine
Product Introduction
The JQT series lightweight partition wall panel extruder adopts the
newly created, random tensioning and
burying of the upper and lower protective layer steel bars or
pre-tensioning the upper and lower protective
layer steel bars, ordinary silica cement or Portland cement as the
gelling agent, low carbon Steel wire is
used as a reinforcing material, and expanded perlite, ceramsite,
slag, fly ash, water slag, river sand, etc.
are used as aggregates, which integrates the multiple processes
required by the traditional manual drawing
mold, ground mold or vertical mold board process One body, once
formed by this machine. With novel
technology and advanced technology, it reduces product cost and
improves product quality and production
efficiency. It is the core equipment for the production of
lightweight partition panels.
Working principle
This machine integrates the multi-processes of cloth, vibration,
forming and demoulding produced by
lightweight partition board: the main motor transmits the power to
the reduction box through the pulley, and
the output shaft of the reduction box drives the spiral stirring
knife in the frame (wall Plate), vibrator and
pedestal constitute the forming cavity to rotate; the light mixture
from the hopper is continuously conveyed to
the forming cavity, and the light mixture is squeezed by the spiral
stirring knife in the forming cavity and the
vibrator is continuous Under the dual action of vibrating, it
produces resonance and is continuously squeezed
and compacted, and reaches the required shape, size and
compactness. At the same time, the vibrated and
compacted strip produces a reaction force against the rotating
stirring knife, pushing the extruder continuously
Advance to achieve continuous plate making. The top of the board is
polished through the forming scraper
at the end of the machine.
Parameters
| Model | Board specification | Speed | Power(kw) | Lifetime of(km) | Dimension | Weight |
| H(mm) | W(mm) | No. of hole | Dia of hole(mm) | (m/min) | Motor | Vibrator | Mixing blade | L*W*H(cm) | kg |
| JQT6x60 | 60 | 600 | 9 | 38 | >0.8-3.2 | 4 | 0.8 | >80 | 250x86x75 | 800 |
| JQT8x60 | 80 | 600 | 8 | 40 | >0.8-3.2 | 5.5 | 0.8 | >80 | 250x95x80 | 1020 |
| JQT9x60 | 90 | 600 | 7 | 58 | >0.8-3.2 | 5.5 | 0.8 | >80 | 250x95x82 | 1100 |
| JQT10x60 | 100 | 600 | 7 | 58 | >0.8-3.2 | 5.5 | 0.8 | >80 | 250x95x82 | 1104 |
| JQT11x60 | 110 | 600 | 5 | 78 | >0.8-3.2 | 5.5 | 1.1 | >80 | 260x90x82 | 956 |
| JQT12x60 | 120 | 600 | 5 | 88 | >0.8-3.2 | 7.5 | 1.1 | >80 | 246x90x90 | 1232 |
| JQT14x60 | 140 | 600 | 5 | 90 | >0.8-3.2 | 7.5 | 1.1 | >80 | 248x95x90 | 1250 |
| JQT15x60 | 150 | 600 | 4 | 110 | >0.8-3.2 | 7.5 | 1.1 | >80 | 246x95x88 | 1366 |
| JQT16x60 | 160 | 600 | 4 | 110 | >0.8-3.2 | 7.5 | 1.1 | >80 | 250x95x90 | 1250 |
| JQT18x60 | 180 | 600 | 3 | 135 | >0.8-3.2 | 11 | 1.1 | >80 | 270x97.5x80 | 1200 |
| JQT20x60 | 200 | 600 | 3 | 142 | >0.8-3.2 | 11 | 4 | >80 | 270x97.5x80 | 1200 |
Main characteristic
1. High efficiency, 0.8-3.2 meters per minute can be produced.
2. The board density is uniform, which changes the situation that
the board at the boundary between the
left-handed and right-handed knives has low strength and is easy to
crack from there after assembly.
3. High degree of mechanization; full hydraulic lifting. Saving raw
materials: Broken steel wires can be
manually connected and used; the produced slats can be produced to
reach the end reinforcement, so
that there is no waste of steel and mixed materials at the end of
the pedestal, and the utilization rate of
the pedestal is improved.
4. Channel steel track can be omitted, saving the cost of making
the pedestal, reducing the difficulty of
production, and improving the precision of production.
5. Long service life, the main wearing parts can be more than
80,000 meters, the vibration plate can be
more than 100,000 meters, and the side wall board can be more than
60,000 meters.
